Disable Wi-Fi - AT&T

Motorola NVG589

1. Log into NVG589 admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Under Home Network, click on Wireless.
3. You should then see the Wireless settings. Select Disabled from the drop-down list under Wireless Operation
4. Click on Save
5. If required, enter the Device Access Code located on the side of your gateway in the Password field

Pace 5031NV

1. Log into 5031NV admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Settings.
3. Click on LAN and then on Wireless
4. You should then see the Wireless interface. Select Disabled from drop-down list next to Wireless Interface.
5. Click on Save
6. If required, enter the Device Access Code located on the side of your gateway in the Password field.

2wire 3800HGV-B

1. Log into 3800 admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Settings
3. Click on LAN and then on Wireless
4. You should then see the Wireless interface. Select Disabled from drop-down list under Wireless Interface
5. Click on Save
6. If required, enter the Device Access Code located on the side of your gateway in the Password field 

2wire 2701HGV-B

1. Log into 2701HG-B admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Home Network
3. You should then see the View Network Summary.
4. Click Disable next to Wireless under Home Network Local Interfaces Status
5. Click on Save and if required, enter the Device Access Code located on the side of your gateway

BGW210

1. Log into BGW210 admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Home Network
3. Click on Wireless
4. if required, enter the Device Access Code located on the side of your gateway
5. You should then see the Wi-Fi settings per Radio. Check that the Radio Selection is set to 2.4 Ghz Radio and select Off from drop-down list next to Wi-Fi operation
6. Click on Save
7. Under Radio Selection select 5 Ghz Radio and select Off from drop-down list next to Wi-Fi operation
8. Click on Save

Arris NVG599

1. Log into BGW210 admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Home Network
3. Click on Wireless
4. if required, enter the Device Access Code located on the side of your gateway
5. You should then see the Wi-Fi settings per Radio. Check that the Radio Selection is set to 2.4 Ghz Radio and select Off from drop-down list next to Wi-Fi operation
6. Click on Save
7. Under Radio Selection select 5 Ghz Radio and select Off from drop-down list next to WiFi operation
8. Click on Save

Netgear 7550 B90

1. Log into 7550 B90 admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Wireless
3. if required, enter the Modem Access Code located on the side of your gateway
4. You should then see the Wireless Setup.
5. Select Disabled from drop-down list next to Wireless Operation
6. Click on Save

Pace 4111N

1. Log into 4111N admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Settings
3. Click on LAN and then on Wireless
4. You should then see the Wireless Interface
5. Next to Wireless Networks, click on Disable
6. Click on Save
7. If required, enter the Device Access Code located on the side of your gateway

2wire i38HG + i3812V / iNID 

1. Log into i38HG admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Click on Settings
3. Click on LAN and then on Wireless
4. You should then see the Wireless interface. Select Disabled from drop-down list under Wireless Access Point
5. Click on Save
6. If required, enter the Device Access Code located on the side of your gateway in the Password field

Arris NVG595

1. Log into NVG595 admin GUI on Web by entering 192.168.1.254 in the browser address bar
2. Under Local Network, click on Wi-Fi.
3. You should then see the Wireless settings. Select Off from the drop-down list under Wi-Fi Operation
4. Click on Save
5. If required, enter the Device Access Code located on the side of your gateway in the Password field