Disable Wi-Fi - Verizon

Netgear Orbi

1. Log into Orbi admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the your admin username and password. If this is your first login, you will be asked to change username, password and timezone
3. Click on Wireless Settings
4. Click on Basic Security Settings
5. Next to Wireless under section 1, select Off
6. Click on Apply

FiOS Quantum Gateway

1. Log into admin GUI on Web by entering 192.168.1.1 or myfiosgateway.com in the browser address bar
2. Enter the your admin username and password. If this is your first login, you will be asked to change username, password and timezone
3. Click on Wireless Settings
4. Click on Basic Security Settings
5. Next to Wireless under section 1, select Off for both 2.4GHz and 5GHz
6. Click on Apply

FiOS Actiontec MI424WR rev. 1/G Wireless Broadband

1. Log into admin GUI on Web by entering 192.168.1.1 or myfiosgateway.com in the browser address bar
2. Enter the your admin username and password (default login is on the label on the router). 
3. Click on Wireless Settings
4. Click on Wireless Basic Security Settings
5. Next to Wireless under section 1, select Off  
6. Click on Apply

Actiontec MI424WR Wireless Broadband

1. Log into admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the your admin username and password (default login is on the label on the router). If this is your first login, you will be asked to change username, password.
3. Click on Wireless Setup
4. Uncheck Enable Wireless and click OK

Actiontec GT784WNV Wireless Gateway

1. Log into admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the your admin username and password (default login is on the label on the router).  
3. Click on Wireless Settings
4. Click on Wireless Basic Settings
5. Next to Wireless under section 1, select Off  
6. Click on Apply

D-Link 2750B Wireless Gateway

1. Log into admin GUI on Web by entering 192.168.1.1 in the browser address bar
2. Enter the your admin username and password (default login is on the label on the router). 
3. Click on Wireless  
4. In the General tab , click on disable
5. Click on Apply